Powerwall 3 vs Enphase IQ Battery 5P for Bay Area homes
One big all-in-one unit or a stack of small modules. How the two most-installed home batteries differ, and which one fits your roof, your panel and your outage plan.
In this article
- Powerwall 3 packs high power and a solar inverter into one unit. Best for new solar and homes with heavy loads.
- IQ Battery 5P is modular and pairs with Enphase microinverters. Best for Enphase homes and step-by-step growth.
- Both work under NEM 3.0 and both provide PSPS backup. Your loads and existing equipment decide.
Since NEM 3.0, nearly every Bay Area solar proposal includes a battery, and two names come up most: Tesla's Powerwall 3 and Enphase's IQ Battery 5P. They solve the same problem in opposite ways. One is a single large box with everything inside. The other is a building block you stack. Neither is better in general. One is usually better for your house.
Side by side
| Spec | Tesla Powerwall 3 | Enphase IQ Battery 5P |
|---|---|---|
| Usable capacity | 13.5 kWh per unit | 5.0 kWh per unit |
| Continuous power | 11.5 kW per unit | 3.84 kW per unit |
| Solar inverter | Built in | Separate, per-panel microinverters |
| Coupling | DC-coupled with new solar | AC-coupled |
| Grows by | 13.5 kWh expansion units | 5 kWh modules |
| Warranty | 10 years | 15 years |
What the numbers mean
Capacity, in kilowatt-hours, is how much energy the battery holds. It decides how long your evening runs on stored solar and how long you last through an outage. Continuous power, in kilowatts, is how much it can deliver at once. It decides whether the battery can run the heat pump, the oven and the dryer together.
It takes three IQ Battery 5P units to roughly match one Powerwall 3 on both counts: about 15 kWh and 11.5 kW. That makes the comparison fair. The question is not which is bigger, but whether you want one large unit or three small ones.
Rule of thumb. Size energy to your 4 to 9pm use. Size power to the largest loads you want running during an outage.
All-in-one vs modular
Powerwall 3 includes the solar inverter, so a new solar and battery system needs one box on the wall instead of two. Fewer components can mean a cleaner install and a lower price for new systems. The trade-off is concentration: if the unit needs service, solar and storage pause together.
Enphase puts a microinverter under every panel and adds batteries on the AC side. If one microinverter fails, the rest of the array keeps producing. Batteries can be added five kilowatt-hours at a time, which suits homeowners who want to start smaller. If your roof already has Enphase microinverters, the IQ Battery 5P is usually the natural fit.
What changes in an older San Francisco home
Many pre-war homes in the city run on 100A service, and wall space in a narrow garage is precious. A single Powerwall 3 is compact for its capacity. A stack of IQ units takes more wall, but each unit is light enough for walls that cannot carry a heavier box. Whichever you choose, check the panel first: some installs need a main panel upgrade or a load-management device before any battery goes in.
Which one fits your house?
We model both against your real PG&E data and show you the difference.
Backup during a PSPS shutoff
Both systems island your home when the grid goes down and keep solar charging the batteries in daylight. The practical difference is power. A single Powerwall 3 can start larger loads than a single IQ Battery 5P, so whole-home backup with a heat pump or well pump often needs fewer Powerwall units, or more IQ modules. For essentials only, both are comfortable.
Ask any installer this. Which circuits are backed up, and what is the largest single load the system can start? If the proposal does not say, ask for it in writing.
Our take
For a new solar and battery system with heavy evening loads, Powerwall 3 is often the simpler, more powerful choice. For homes with Enphase solar already on the roof, or owners who want to grow storage in small steps, the IQ Battery 5P makes more sense. In both cases the design matters more than the logo: correct sizing, a clear backup plan and a clean install.