Services
Home batteriesSolar + battery systemsSolar panelsAdd a battery to solarEV chargersMain panel upgradesAll services →
Areas we serve
San FranciscoSan FranciscoNorth BayEast BayPeninsulaSouth BaySee every city →
Resources
Batteries · Buyer's list

The best home batteries for Bay Area homes: 4 to compare

Four batteries worth a place on your shortlist, what each one does best, and how to pick between them for your loads, your roof and your outage plan.

SolarUnion Editorial TeamIndependent solar and battery guides
Updated 4 min read
In this article
The short answer
  • New solar and battery together: Tesla Powerwall 3, with the solar inverter built in.
  • Whole-home backup with big loads: FranklinWH aPower 2, sized for heavy circuits.
  • Homes with Enphase solar: IQ Battery 5P for small steps, or IQ Battery 10C for fewer units.

There is no single best home battery. There is a best battery for your house: your evening load, the circuits you want backed up, the solar you have or plan to add, and the wall space in your garage. Under NEM 3.0, nearly every Bay Area solar proposal now includes storage, so it pays to know the main options before an installer recommends one.

How we chose

We picked batteries that are widely installed in California, carry UL 9540 listings, provide backup during outages and work with PG&E's time-of-use rates. We compared them on usable capacity, continuous power, how they connect to solar and how they grow. Specs below come from manufacturer datasheets. SolarUnion does not sell or install any of them.

Two numbers matter most. Usable capacity (kWh) decides how long the battery lasts. Continuous power (kW) decides how much it can run at once.

1. Tesla Powerwall 3

Best for: new solar and battery systems, and homes that need high power from one unit.

Powerwall 3 stores 13.5 kWh and delivers up to 11.5 kW of continuous power. Its biggest difference is the built-in solar inverter: on a new system, the panels connect straight to the battery, so you need one box on the wall instead of two. That usually means a cleaner install and fewer parts. Capacity grows with expansion units.

Watch for: because solar and storage share one unit, a service issue can pause both at once. If you already have solar with its own inverter, ask how the Powerwall 3 would connect to it.

2. FranklinWH aPower 2

Best for: whole-home backup and homes with heavy loads such as heat pumps or well pumps.

The aPower 2 stores 15 kWh with 10 kW of continuous power, and pairs with FranklinWH's own backup gateway. It works with new or existing solar of most brands, which makes it a common choice when adding storage to a system that is already on the roof. Additional units add capacity for longer outages.

Watch for: it is a separate unit from your solar inverter, so plan wall space for both. Confirm how the gateway handles your largest loads.

3. Enphase IQ Battery 5P

Best for: homes with Enphase microinverters, and owners who want to start small and grow.

Each IQ Battery 5P stores 5.0 kWh and delivers 3.84 kW of continuous power. It connects on the AC side and pairs naturally with Enphase solar. Because each unit is small and light, you can add storage five kilowatt-hours at a time, and stack units on walls that could not carry a heavier box. Three units roughly match one Powerwall 3 on both capacity and power.

Watch for: matching a large unit takes several modules, which means more wall space. Check how many units your backup plan really needs.

4. Enphase IQ Battery 10C

Best for: Enphase homes that want more capacity per unit and fewer boxes on the wall.

The IQ Battery 10C stores 10.0 kWh with 7.08 kW of continuous power in a single unit. It keeps the Enphase approach, AC-coupled and modular, but halves the number of units needed for a given capacity compared with the 5P. That suits garages where wall space is tight.

Watch for: like the 5P, it is designed around the Enphase system. If your solar uses a different inverter brand, ask how it would integrate.

BatteryUsable capacityContinuous powerSolar inverterBest fit
Tesla Powerwall 313.5 kWh11.5 kWBuilt inNew solar and battery, high power
FranklinWH aPower 215 kWh10 kWSeparateWhole-home backup, large loads
Enphase IQ Battery 5P5.0 kWh3.84 kWSeparate microinvertersEnphase homes, small steps
Enphase IQ Battery 10C10.0 kWh7.08 kWSeparate microinvertersEnphase homes, fewer units
Per unit, per manufacturer datasheets. Confirm current specs and warranty terms with the manufacturer before you buy.

Not sure which one fits?

Your evening load and backup plan decide. Start with your own numbers.

Get my battery estimate

How to choose

  1. Decide what to back up. Essentials only, or the whole house? This drives size more than anything else.
  2. Find your evening load. Your PG&E interval data shows how much you use from 4 to 9pm. Size capacity to cover it.
  3. List your largest loads. A heat pump or well pump needs enough continuous power to start. Size power to those.
  4. Match your solar. Enphase homes lean toward Enphase batteries. New systems can take advantage of an all-in-one unit.
  5. Check the wall. Measure garage space near the main panel, and ask about outdoor mounting if space is tight.

For the runtime math, see how long a solar battery can power a house. For a closer look at two of these, read Powerwall 3 vs IQ Battery 5P, and for what a complete installation should include, see our home battery buyer's guide.

Compare quotes on the same scope. A cheaper quote with fewer backed-up circuits is not cheaper. Ask every installer which circuits are covered and how many hours they should run.

Find the right battery for your home.

A battery plan sized to your evening and outage loads, free and without a sales call.

Get my battery estimate
GuidesGet my estimate